Our range of heat exchangers is designed as per industrial standards and is available in numerous specifications. Heat exchangers of the WED range are used to cool buffer fluids in seal supply circuits. Designed as a tubular heat exchanger, the WED is outstanding for its high cooling capacity yet compact dimensions. Design, production and material selection conform with the German Pressure Vessel Regulations and to the AD Code.

Some of the salient features of our range are mentioned below:

• The buffer medium is directed through the jacket and the cooling water through the tubes

• The heat exchanger can be installed either in horizontal or vertical position

• It is possible to clean the cooling water area (mechanically after removing the cover) and the buffer medium area (by flushing with a suitable solvent)

Components:

• WED 2130/A100 WED 3110/A100

Connections:

• N2 Cooling water OUT

• N1 Cooling water IN

• N4 Buffer medium OUT

• N3 Buffer medium IN

• N7/N8 Buffer circuit vent

• N5 Cooling circuit vent

• N6 Cooling water drain

Material:

• Parts in contact with the medium: 1.4571

• O-rings: Viton
• Gaskets: PTFE 

Our range of magnetic filter offered by us includes Supply system Components MAF2000, magnetic filter MAF2001 and MAA2120 Magnetic separator.

Supply system Components MAF2000 magnetic filter MAF2001:

Magnetic filter with internal mesh to protect the filter element for reverse currents (Item 3a):

Magnetic filters of the MAF range are through flow filters for installation inside pipe lines. The combination of magnetic rod and filter element guarantees a high level of efficiency. Magnetic filters are used in seal supply systems and any other such systems in which a liquid has to be cleaned of magnetic and non-magnetic impurities up to a certain size.

• Filter cover

• Filter barrel

• element insert 3a internal mesh 6 ring magnet 13 venting screw

Salient Features:

• All pressure-loaded parts are forged components

• Venting screws (Item 13) in the filter inlet and outlet can be used as connections for maintenance or differential pressure indicator

• Pipe connections can be either G to G1 (DIN ISO 228) or with NPT internal thread

• Two types of contamination indicator are available as accessories: visual monitoring and/or in combination with a switch

Technical Data:

• Permissible operating pressure: 63 bar

• Permissible operating temperature: 150° (higher temperatures on request)

• Filter mesh: 50 m

• Weight: approx. 7.8 kg

• Cover and filter barrel: 1.4571

• Filter insert and element: 1.4301, 1.4401 O-rings: Viton®

• Gaskets: PTFE

MAA2120 Magnetic Separator:

Magnetic candle in a pressure casing is used for installation in a pipe line. The magnetic candle can be removed for cleaning by opening the cover (with the line de-pressurized). Maintenance intervals depend on the degree of soiling. We recommend checking, and if necessary, cleaning the magnet candle several hours after using for the first time; and each time after flushing the pipes, because experience indicates that much of the dirt is flushed out of the pipe lines at this time.

Specifications:

• Calculation and design in accordance with the AD Code (material list on request)

• 1 + 2 Casing and cover: 1.4571

• 3 O-ring: E

• 4+8 Screws: A4 - 70 stainless steel

• 5 Washers: T2

• 6 Ring magnets: corrosion-resistant

• 7 Spring: 1.4301 9 Fixing hole

Technical data

• Permissible operating pressure: 120 bar

• Test pressure: 180 bar

• Permissible operating temperature: 160°C

• Capacity: 0.08 liters

• Pipe connections G % or NPT internal thread